White noise trying to play DSD file from Oladra to Lampizator Horizon 1

[joeling]

Hi,

I am using either the HDMI or RJ45 i2S connection from my Oladra to the Lampizator Horizon 1 (old model) but I get white noise while trying to play DSD files. PCM is fine. What am I doing wrong ? I am guessing I need to change the positions of the toggle (DIP) switches at the bottom of the chassis of the Oladra unit. Need your kind assistance to provide some advice on the configuration. Much appeciated.

Joe

[MarkCole]

Hi there, I would use HDMI, see the master thread below:

I2S Connection on Antipodes - Master Thread

I2S has recently become a topic of discussion, I thought I would try and clear the water with regards, Antipodes and I2S Antipodes Audio currently has I2S via HDMI and RJ45 on the OLADRA, K50 (original K50 HDMI only) and the K22. The S20 via HDMI only. The HDMI runs on LVDS and has dip switches on the underside of the units to set for DSD playback, the dip switches are only required for DSD playback, and only for the HDMI output. Antipodes Audio devices with dip switches are set at PSAudio s…

The Horizon manual is a bit scant on information; however, it appears that the Horizon also uses PSAudio config, can this be confirmed by Lampizator